Clyde Iron Works

Frame 6 Single Drum Hoist

11L15 Drum Gear

Rated 15,000 # at 148 Feet Per Minute (fpm) on the 2nd layer of cable.

Stall pull is approximately 36,000 pounds

75HP Electric motor with variable speed controls, motor starter and disconnect boxes.

1740 RPM, 230/460 VAC, 176/88 Amps

Manual controls for friction, drum pawl (dog) and foot brake.

Sheet metal very nice, all guards in place and in good condition.

Some cable on drum, four corner pad-eyes, all original not bent up!!!!

27 inch wide drum, unit weight of 9000 pounds.

8" wide two piece split brake band.

Thought to be original paint!!

CABLE SPOOLING CAPACITY INFORMATION:
1502' of 1"
1935' of 7/8"
2689' of 3/4"

Looks like it has been in a building all its life, probably never near the water.

Good band material and bands. Excellent gears, bearings, chain, sprockets and lubrication.

Would make an excellent barge or railcar moving winch.

Extended drum shaft cut short.

They don't come used in this shape very often, better hurry!!

Located at 5917 Hwy 90 East in Broussard, LA 70518

Call Jac Cloutier at 985-384-9517 or www.triplecmarine.com