Nautilus Marine Crane


• Model 5-30-50
• Turret (pedestal ) mounted on 36" O.D. pipe which is 48" tall with a square base plate below that.
• Enclosed high visibility swing cab.
• Three stage boom with two telescoping sections for 50' extended
• Load chart is posted in cab behind seat.
• Rated 14000 pounds at 10' radius
• Minimum radius of 5' retracted (14,000 pounds at 5' also)
• 1500 pounds at 50'
• Approximately 23' long, 8 feet wide and 12' tall with cab installed.
• About 15,000 pounds more or less
• Most of the paint and glass intact. Metal appears to be galvanized under the paint.
• Majority of hoses and circuits appear to be sealed and connected.
• Boom fully retracted and assumed straight.
• Tried and true little Braden winch is full of cable. Tag on winch with these numbers:
PD12A36057-02-1
8200178
8/7/91
97318
• Large Commercial Shearing Hydraulic spool valves located behind cab for easy access and improved visibility though lower front cab for operator.
• Swing motors are easy to access on either side of boom. That's right double swing motors!!
• All hoses easy to access and change.
• Operator is much safer from risk of hot oil spray due to bursting hose with the glass and no lines/hoses in cab.

Located at 5917 Hwy 90 East in Broussard, LA 70518

No power included with this one.
Hard to find little telescoper in apparently good condition. I get a lot of calls for these, don't wait on this one.

Manufacturers website: http://www.oilstates.com/solutions/offshore/cranes/file.asp

SOLD 10/31/06

Some more pictures available by email