Pipe or Tank Rollers

5 ea. Sets of pipe or tank rollers.  These cable the work object and allowing it to be turned and worked on.  They are meant for larger jobs and are adjustable for different diameter working pieces.  Although they look very simple, they are extremely heavy duty and very expensive to build.  Rarely does anyone part with these.  Being offered at $8,000.00 for the lot, f.o.b. our yard in Morgan City.
Contact: Jac Cloutier @ (985) 384-9517

#1 Ransome Turning Roll,  Total length 82", Rollers spread out 44" on center, Diameter of rubber roller is 20", Height of channel irons is 12" Height of shaft center is 16.5", total height is 26", Width of roller is 14", width of frame is 21.5"

#2 Ransome truning roll, total length is 112.5", rollers will spread to approx 84" on center of shafts, rollers are 20" diameter and 21" wide.  Frame is 29.25" wide and 12" channel, shaft center approx 17" off ground, total height approx 26".  Model DIRR, Serial #402000, dated 11-75 numbered E28875

#3 Ransome turning roll, Model BIRR, serial #362466, dated 3-79 numbered E37311, 112" toal length, 15" wide, 12" channel, shaft centers are approx 16" off ground, total height is approx 26", rollers are 20" diameter and 8" wide.  Rollers are set out at approx 43.5" and are fixed.  Can be moved out but will need a cutting torch.

#4 Same as #3, Serial # 352400, Capacity tons turning 45, load 15.

#5 no tag, 80" overall length, 24" wide 10.25" channel, shafts approx 16"  above ground on center, overall height approx 26", rollers 20" in diameter and 15" wide.