Military Surplus (NEW)
Three roller fairleads

Very nice, new condition, excellent paint.  Rollers are turning freely and have no slack.
The base is 3/4" plate with some mounting holes drilled and room for more.  The structure is mostly of 5/8" thick steel plate.  The rollers are approx. 5.5" in diameter.  The top roller is 9" long.  The two side rollers are 7" high.  The pins through the rollers measure 2.5" in diameter and have grease zerks and retainer plates, to keep the shafts from turning, which are easy to remove with one bolt.
The clear opening is about 4.5", enough to pass a shackle or thimble.  Roller type fairleads can be used for rope, wire rope, chain or hose; whereas sheave type fairleads are mainly just for wire rope.  Check with your engineering department for applicability before using.  It may be possible to have added a fourth roller (on the bottom) if needed.  Contact your machine shop regarding alterations/modifications.   Located at Broussard, LA yard.
Weight estimated at about 250-300 pounds each.  Priced at $1,500 ea. or $2,800 pair.
Contact Jac Cloutier at (985) 384-9517